Mechanical Parameter:
  Shell Material:High strength aluminum alloy
  Finish:Passivation, Olive drab chromate coating over/ Zinc plating,black/silver.
  Insulator:High temperature resistant synthetic rubber

     Contacts: Copper alloy gold plated
  Grommet and seal: Silicon rubber
  Endurance: 500 cycles

Technical Parameter:
  Operating Temperature:–55℃~+125℃

      Relative Humidity: 95% at 40℃
  Vibration:Frequency 10Hz~2000Hz,Acceleration 147m/s2
  Impact:Acceleration  490m/s2

        Hermetic:Pressure  0.2Mpa

      Salty spray Test:72H  unconnected

       Synthetic rubber insulator flame retardant grade: UL94 V-0    220℃

        Anti-moisture, salt spray, mould, rain, dust conform to EIA364.26 and Mil-C-5015 3.17.


Electrical Parameter:

接触件规格Contacts size(AWG)接触件直径contacts D(㎜)接触电阻(m Ω) Contacts resistance额定电流(A)Rated Current 
 20 φ1.0  ≤ 10 10
16φ1.6≤ 615 
12φ2.4 ≤ 3 30 
8φ3.6 ≤ 1 50
4φ5.7 ≤ 0.5 80
0φ9.1 ≤ 0.2 120 


    


额定电压( V )Rated Voltage 耐电压( V )Withstanding Voltage 绝缘电阻( m Ω)Insulation Resistance 
常温常压Normal 500 5000 ≥ 5000 
湿热Damp heat 500 2000 ≥ 2000 
高温High Temp 250  1500 ≥ 1500 

20190801161252569.jpg

20190801161252754.jpg

20190801161252754.jpg

20190801161252754.jpg

20190801161559711.jpg

20190801161559508.jpg



Shell Size and  Contacts Arrangement:

20190801152849348.jpg

20190801152849766.jpg

20190801152849829.jpg


20190801152850934.jpg

20190801152850472.jpg

20190801152850951.jpg


20190801152850802.jpg

20190801152850933.jpg

20190801152851639.jpg

20190801152851661.jpg

20190801152851773.jpg

20190801152851192.jpg

20190801152852808.jpg

20190801152852641.jpg

20190801152852387.jpg

20190801152852233.jpg

20190801152853578.jpg

20190801152853289.jpg

20190801152853174.jpg

20190801152853719.jpg

20190801152853568.jpg

20190801152854312.jpg

Thanks  for your  attention! Welcome to  choose  our  Products.




MS3108A angled plug

Maojwei Mil-C-5015 series connectors conform to US military Mil-C-5015 standard (GJB600), with high strength Aluminum Alloy shell, Synthetic rubber insulator, threaded coupling, Alternate insert positioning, solder and crimping terminal, low cost, simple and practical design, widely used in industrial machinery and equipment, military , defense equipment, marine , automobile industry, instrument and servo motor etc. Our connectors can replace European and American similar products.

Features: High quality,high withstanding voltage, high reliability;low cost;light weight, different size;solder and crimping type;good sealing performance, waterproof IP67;corrosion resistance; hard dielectric inserts;good electrical conductivity and mechanical strength.

Shell styles:5 (MS3106 MS3108 MS3102 MS3101 MS3100); dust caps;

Shell Size:10SL 12S 14S 16S 16 18 20 22 24 28 32 36

Contacts Number:1 2 3 4 5 6 7…55 57 64